Views: 0 Author: Site Editor Publish Time: 2022-04-26 Origin: Site
With the development of the automobile industry, tire technology has been continuously improved and improved, so what are the use, maintenance, and precautions of a scaffold caster? Let us take a look together next.
Here is the content list:
l Use and maintenance
l Precautions
1. Improve awareness of pneumatic wheel tires. Tubeless tires are still in the early stages of use in China, and there is not enough understanding of the advantages of pneumatic tires, and they are still treated with traditional concepts. This not only shortens the service life of pneumatic wheel tires but also hinders the full use of its superior performance.
2. Strict pneumatic wheel tire inflation standards. Inflation strictly according to the standard is the key to prolong its service life. If the air pressure of a scaffold caster is higher than the standard, it will lose the flexibility of the tire, damage the cushioning performance, increase the jitter when the vehicle is running, and make the braking performance worse; The main reason for early tire damage). Because under the same air pressure, the radial deformation of tubeless tires is more than three times that of ordinary tires. Such a large amount of deformation will damage the bead and the edge of the buffer layer. In severe cases, the tire will be quickly scrapped.
3. Check the qi in time. After the scaffold caster is inflated, it is not sealed. Even when the pneumatic rubber tire and valve core are intact, they will leak by themselves. Therefore, it is necessary to check and make up frequently. Check the air pressure of common vehicles before leaving the vehicle, when parking, and after receiving the vehicle. Before leaving the car and when parking, you can use the sensory inspection, and the inspection after the car should be measured with a barometer after the tires have dropped to room temperature. The pneumatic rubber tire pressure gauge should be checked and corrected regularly to avoid excessive errors. To reduce self-leakage, valve caps must be equipped to protect the valve mouth.
4. Driving correctly, driving has a decisive influence on the life of tubeless tires. Sharp turns, high speed when turning, frequent emergency braking, poor road selection, and hitting road users are all factors that constitute the damage of the pneumatic Rubber Wheel tire and cannot be ignored. Keeping the vehicle running at a medium speed can reduce tire temperature and extend its service life. According to the data, when the vehicle speed is changed from medium speed to high speed, the driving mileage of pneumatic Rubber Wheel tires will be reduced by 15%.
5. Use special tools to disassemble and assemble the scaffold caster. When the tire needs to be repaired, it is best to go to a manufacturer with special tools to repair it. It is also worth the extra expense because damage to a tire can range from hundreds to thousands of dollars. At the same time, please note that you should make a mark before removing the pneumatic tire so that the original rolling direction and movement level can be maintained during assembly.
6. Correctly select and install a pneumatic Rubber Wheel tire. Use tires of the same type, pattern, and new and old levels on the same car, so that they can reasonably bear negative tolerances and achieve uniform wear. Arbitrary mixing will not only accelerate pneumatic Rubber Wheel tire damage during use but also increase the wear and fuel consumption of transmission parts.
1. Check the pneumatic Rubber Wheel tire pressure should be at room temperature.
2. Do not rush out after the foreign body has pierced the tire.
3. It is not recommended to install pneumatic rubber Wheel tire inner tubes in hollow tires. If you want to make full use in an emergency, you can choose matching inner tubes and rims. At the same time, it is not allowed not to change the rim.
4. Do not splash water after the tire temperature rises. Because of the sudden cooling of the scaffold caster by splashing water, each part shrinks unevenly, which is prone to deformation and cracks.
Jiangsu Shenpai Caster Co., Ltd is a professional caster manufacturer in China. Located in the center of the Yangtze Delta, SHENPAI has benefited from the well-developed industry and convenient transportation. Since its foundation in 1993, SHENPAI has developed thousands of types of various casters & wheels. We have produced wheels with a diameter from 1 inch to 1 meter, the maximum capacity of our super-heavy caster is up to 5000kg per caster. With an experienced team and efficient devices, we can be your reliable supplier. The above is about the use and maintenance of pneumatic rubber Wheel tires and matters needing attention. If you are interested in the scaffold caster, you can contact us. Our website is https://en.shenpai.com/.
